IKEA PRO A31 S Instrukcja Obsługi Pobierz pdf (Strona 119)

ENGLISH 119

Gas adjustments

Use pressure regulators that are suitable

for the gas pressure values indicated in the

injectors table.

If the appliance is arranged for a type

of gas different from that available, it is

necessary to change the injectors, adjust

theminimumame,changetheoutlet

connector.

Carry out the following operations to

change the hob injectors: remove the grills;

remove the burners, the burner caps (see

Fig. 6); change the injector and replace it

with one suitable for the new type of gas

(see injectors table).

Fig. 6

Replace the gas calibration label with the

new label included in the injector bag.

Reteverythinginreverseorder,making

suretocorrectlyttheburnercaponthe

burner.

Minimum ame for hob taps

Toadjusttheminimumame,proceedas

follows:

Light the burner and turn the knob to •

minimum ; remove the tap knob. Insert

a small screwdriver next to the tap pin

(Fig. 7).

Fig. 7

Turn the adjustment screw anticlockwise to

increasetheame,orclockwisetodecrease

it. Adjustment is correct when the ame is

approx. 3 - 4 mm.

The adjustment screw must be completely

screwed down for butane/propane gas.

Makesuretheamedoesnotgooutwhen

switching suddenly from high to low ame

and vice versa.

Rettheknob.

Gas appliances

This appliance is not connected to a fume

exhaust device.

Therefore it must be installed and connected

in compliance with current and local

installation regulations.

Particular attention must be paid to the

applicable standards concerning room

ventilation.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 129 130

Komentarze do niniejszej Instrukcji

Brak uwag

IKEA PRO A31 S Instrukcja Obsługi Strona 119

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze IKEA PRO A31 S