IKEA HBG L70 B Instrukcja Obsługi Pobierz pdf (Strona 13)

ENGLISH 13

replaceitwithanotheronehavingthesame

featuresbutwiththerightlength.

Adjustment to different type of gas

WARNING

- This operation must be performed by a

qualiedtechnician.

Iftheapplianceisintendedtooperatewith

a different gas from the gas type stated on

the rating plate and information label on

the top of the hob, change the injectors.

Removetheinformationlabelandkeepit

withtheinstructionsbooklet.

Use pressure regulators suitable for the gas

pressure indicated in the Instruction.

- The gas injectors must be changed

byAfterSalesServiceoraqualied

technician.

- Injectorsnotsuppliedwiththeappliance

must be ordered from After Sales

Service.

- Adjust the minimum setting of the taps.

NOTE:whenliquidpetroleumgasisused

(G30/G31),theminimumgassettingscrew

mustbetightenedasfarasitwillgo.

IMPORTANT: should you experience

difcultyinturningtheburnersknobs,

please contact the After Sales Service for

the replacement of the burner tap if found to

be faulty.

IMPORTANT:whengascylinderisadopted,

the gas cylinder or gas container must be

properly settled (vertical orientation).

Replacing the injectors (see paragraph

“injector table”)

- Remove grids (A).

- Extract burners (B).

- Usingasocketspannerofthe

appropriatesizeunscrewtheinjector

(C),unscrewtheinjectortobereplaced.

- Replaceitwiththeinjectorsuitablefor

thenewtypeofgas.

- Re-assemble the injector in (D).

Beforeinstallingthehob,remembertoafx

thegascalibrationplatesuppliedwith

theinjectorsinsuchawaythatitcovers

the existing information relating to gas

calibration.

Replacement of the gas injector

Adjusting minimum gas setting of taps

To ensure that the minimum setting is

correctlyadjusted,removetheknob(E)and

proceedasfollows:

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag